 |
PC13 | |||
|
PC13 converts
DC input signal in a pneumatic output (3÷15, 2÷18,
2÷20, 4÷30 psi). ABS case IP20 for panel mounting.
Download Literature
Download Handbook
|
||||
|
|
||||
|
|
||||
 |
PC15 | |||
|
I/P converter
for field mounting. It converts DC input signal in a pneumatic
output (3÷15, 2÷18, 2÷20, 4÷30 psi). Available on request safety version (94/9/EC "ATEX") : II 1 G Ex ia IIC T6, T5 Available on request safety version (94/9/EC "ATEX") : II 3 G Ex ia IIC T6, T5 /II 3 D Ex tD A22 IP65 T85°C
Download Literature
Download Handbook
|
||||
|
|
Download ATEX documents Gas Zone 0 DIRECTIVE 94/9/EC |
 |
Download ATEX documents Gas Zone 2 / Dust Zone 22 DIRECTIVE 94/9/EC | |
|
|
||||
 |
PC18 | |||
|
/P converter
suitable for high power actuators. It converts DC input signal in
a pneumatic output up to 8 bar. Available on request safety version (94/9/EC "ATEX") : II 1 G Ex ia IIC T6, T5 Available on request safety version (94/9/EC "ATEX") : II 3 G Ex ia IIC T6, T5 /II 3 D Ex tD A22 IP65 T85°C
Download Literature
Download Handbook
|
||||
|
|
Download ATEX documents Gas Zone 0 DIRECTIVE 94/9/EC |
|
Download ATEX documents Gas Zone 2 / Dust Zone 22 DIRECTIVE 94/9/EC | |
|
|
||||
 |
C27 | |||
|
P to I converter series 27C are designed to interface pneumatic 3÷15 psi / 0,2÷1 bar signals to control systems, data loggers and other data recording equipment.
Download Literature
|
||||
|
|
||||
